NEO-F10T L1/L5/E5a INDUSTRIAL IP67 TIME & RAW receiver

NEO-F10T INDUSTRIAL IP67 receiver with SMA antenna and SMA TPS connectors for your RTK systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.

The NEO-F10T timing module provides nanosecond-level timing accuracy to the most demanding infrastructure applications. Thanks to the module's dual-band functionality, it can provide excellent timing accuracy without the need of an external GNSS correction service. Additionally, when within the operational area of a Satellite Based Augmentation System (SBAS), NEO-F10T offers the possibility to improve the timing performance by using the ionospheric corrections provided by the SBAS system.

As NEO-F10T supports all four global satellite constellations, it is ideal for global deployments with single HW SKU. The NEO-F10T module supports the L1/L5/E5a configuration. NEO-F10T includes advanced security features such as secure boot, secure interfaces, and T-RAIM to provide the highest level timing integrity.

The module has a single RF input for all the GNSS bands and dual SAW filters for exceptional signal selectivity and out-ofband attenuation. NEO-F10T is designed to meet the most stringent timing synchronization requirements in 5G mobile networks on a global scale.

The NEO-F10T Evaluation board makes evaluating the high performance of the u-blox 10 positioning engine simple. The NEO-F10T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-F10T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested IP67 receiver for the NEO-F10T

---

• u-blox F10 engine GPS/QZSS L1 C/A, L5; GLONASS L10F; Galileo E1B/C, E5a; BeiDou B1C, B2a; NavIC L5; SBAS L1 C/A: WAAS, EGNOS, L1Sb, GAGAN
• SuperSense Indoor GPS, -167dBm
• On-board low noise 3.3V voltage regulator and RF filter for noise blocking
• Support active antenna
• USB C interface
• SMA antenna connectors
• SMA Time Pulse connector
• Power LED, Time Pulse LED
• u-center u-blox Evaluation Software
• Extensive visualization and evaluation features
• Supports AssistNow Online and AssistNow Offline A-GPS services
• Flash memory for firmware upgrade and settings inside in the module (can save setings without battery)
• Supercapacitor for HOT module start
• Dimensions: 50x40x18 mm
• Weight 55 gramm
• Fully assembled and ready to use
• Working temperature: -40 °C ~ +85 °C
• Storage temperature: -55 °C ~ +95°C
• Humidity: 95% No condensation
• Vibration: MIL-STD-810F
• Shock: MIL-STD-810F
  

NEO-F10T features:

• u-blox F10 engine GPS/QZSS L1 C/A, L5; GLONASS L10F; Galileo E1B/C, E5a; BeiDou B1C, B2a; NavIC L5; SBAS L1 C/A: WAAS, EGNOS, L1Sb, GAGAN
• Nav. update rate Concurrent GNSS: up to 10 Hz
• Position accuracy 1.5 m CEP (Autonomous)
• Acquisition GPS, GLONASS, Galileo, BeiDou, NavIc
• Cold starts: 27 s
• Aided cold starts: 2 s
• Sensitivity Tracking & Nav: –167 dBm
• Cold start: –148 dBm
• Reacquisition: –158 dBm
• Hot start: -159 dBm
• Assistance AssistNow GNSS Online
• AssistNow GNSS Offline (up to 35 days)
• AssistNow Autonomous (up to 6 days)
• OMA SUPL & 3GPP compliant
• TCXO Oscillator
• Built-In RTC crystal
• Extra LNA for passive antenna
• Anti jamming Active CW detection and removal.
• Dual on-board SAW band pass filter
• Internal SQI Flash for Firmware update
• Secure boot, secure firmware update, configuration lock
• Active antennas supported